Skip to main content

Allow Spotipo servers through your UniFi firewall

R
Written by Rakesh M
Updated over 2 weeks ago

🔹 Applies to: UDM, UDM-Pro, UXG-Pro, and similar UniFi Security Gateways.

The following IP addresses must be allowed through all firewalls on your network to ensure Spotipo can connect properly. This guide details firewall setup for UniFi devices only, but the same rules apply to any other firewall in use.
Under Firewall Rules, press Create New Rule

For UniFi Gateways (UDM, UXG, etc.)

  1. Go to Settings > Firewall and Security.

  2. Under Firewall Rules, click Create New Rule.

  3. Configure the rule:

  4. Type: Internet Local

  5. Description: spotipo_allow

  6. Action: Accept

  7. IPv4 Protocol: All

  8. Destination IP & Port Group: Any

  9. Create a New Port/IP Group:

  10. Name: Spotipo_servers

  11. Add these IPs:

107.178.247.148  
35.244.104.229  
35.236.87.84  
104.155.46.61


Finally save the Firewall rule and you should see something like below in your Firewall Rules

sing UniFi's Zone-Based Firewall?** Follow this guide

Did this answer your question?