This guide is valid only for IAP firmware newer than 6.5 if your AP firmware is older, please follow

For firmware versions 6.5+ site type to use is Aruba Central

Add an Aruba Central Site in Spotipo

Each location is represented by a Site. A site can have multiple routers (of the same type)

After adding the client add a new site by clicking on the Add New Site button in the drop down menu on top right.



Select the Site type as Aruba Central and configure the correct timezone and Save



Add a Network

In the newly created site, navigate to Networks tab and create a New Network.



Provide a name to identify your network



After adding the network, take a note on the URL, NAS ID and Radius Secret



Configure Aruba IAP

Connect to IAP web portal and use the New Network option.



Enter the SSID you would like to have and keep the network type as Guest



In the security tab, select splash-page type as external and add a new captive portal profile.



Fill in the following details

Hostname: portal.logme2wifi.com

URL: Generated in previous step

Port: 443

Use HTTPs: Enabled



Next add a new auth server by providing

IP Address: 34.77.150.10

Shared Key: Generated in previous step

Nas Identifier: Generated in previous step



Enable accounting to the same server as well and use 2 min as Accounting Interval



Enable Domain ACL for all the for all the required domains

Walled garden settings are not available from 6.5.4 firmware version. Hence use Domain ACL

Save And Test

Click Next and Save the configuration. Wait for a few minutes and then connect to the SSID you have just created to test it out.
Was this article helpful?
Cancel
Thank you!